Description :

A continuous, solid, corrosion-resistant, chronium-nickel-molybdenum wire for welding austenitic stainless alloys of the 19%Cr, 13% Ni, 3% Mo types. This wire has a low carbon content which makes it particularly recommended where there is a risk of intergranular corrosion. It has a good resistance to general corrosion and pitting due to its high content of molybdenum.

Applications :

It is used in severe corrosion conditions, such as in the petrochemical, pulp and paper industries.

Note On Usage:

1. For GTAW process, use DC-EN, Argo Shield and Tunsten Electrode.

2. For GMAW process, Spray Transfer or Short Circuit Transfer mode can be used.

3. 98% Argon -2% O2 shielding gas is recommended in GMAW process.

Typical Chemical Composition Of Weld Metal (wt%) :

Weld Metal Analysis :

Carbon (C)               0.021

Chronium (Cr)          19.60

Nickel (Ni)               14.20

Molybdenum (Mo)    3.50

Manganese (Mn)       1.30

Silicon (Si)                0.53  

Typical Mechanical Properties Of Weld Metal:

TS N/mm2              570

EL%                       41

Approval and Conformances :

-

Size Available

MIG Solid Wires (mm)	0.6, 0.8, 0.9, 1.0, 1.2, 1.6
TIG Rods (mm)	0.8, 0.9, 1.0, 1.2, 1.6, 2.0, 2.4, 3.2, 4.0