Applicable for Steel, Stainless steel, Alumunium material

Features:

·          Continuous welding for 2 stroke and 4 stroke

·          Spot welding, with spot time

·          Interval welding, with welding and interval time

·          Soft start adjustment

·          Pre gas adjustment

·          Post gas adjustment

·          Burn back adjustment

·          Gas test

·          Wire inching

·          Fine and coarse voltage adjustment

·          3 connections for inductance

·          Easy load gas cylinder with lowered platform

·          Thermal overload protection

·          Strong machine fan for maximum cooling system

The Outstanding Performance:

·          Japanese compact design Mig Mag machine for light to medium industries, delivers highly reliable welding results, of impeccable quality.

·          Copper coil and the latest Japanese rectifier technology to produce excellent welding characteristics for CO2 and mixed gas mig mag welding.

·          A reliable choke transformer is optimally produced for better welding and less spatter.

·          Rugged industrial wire feeder system, with two geared feed rolls, quick-change reversible drive rolls and easy-to-set, scaled tension knob.

·          Inclined wire spool hub for smooth wire transfer and better welding result.

·          Thermal Overload Protection, Internal components are protected from damage by thermal overload protection which automatically shuts down the unit.

Accessories

·          Mig torch “Binzel” Abimig 450 at 3m length

·          Interpass cable at 3m

·          Ground clamp + cable at 4m

·          Pressure regulator “Kobewel”

·          Main cable + plug at 3m length

·          Feed roll diameter 1.2mm/1.6mm

Optional Feed Roll

·          For Steel and Stainless steel

o         Ć 0.6&0.8 = 888.01.421

o         Ć 1.0&1.2 = 888.01.422

o         Ć 1.6&2.4 = 888.01.423

·          For Aluminum

o         Ć 0.6&0.8 = 888.01.424

o         Ć 1.0&1.2 = 888.01.425

o         Ć 1.6&2.4 = 888.01.426

Welding
Welding range	40-500A
Load voltage	16-39V
No load voltage	49V
Voltage Settings	4 x 10
Duty cycle at max. current	60%
Welding current at 100% duty cycle	390 A
Weldable Steel wire	0.8-2.4mm
Weldable Alumunium wire	0.9-2.4mm
Wire feed rate	0.5-20m/min
Mains
Mains voltage	3~380V
Mains frequency	50 Hz
Main fuse (slow-blow)	35A
Max. power consumption 220V	23 KVA
Power factor	0.96
Device
Protective system	IP 21
Insulation class	H
Cooling type	F
Noise emission	< 75dB (A)
Dimension & Weight
Machine dimension L x W x H	950 x 390 x 750mm
Machine weight	150 Kg
Wire feeder dimension L x W x H	550 x 242 x 410mm
Wire feeder weight	21 Kg
Order #	888.01.116