Description :

SS-307HM gives a full nonmagnetic austenite structure containing 6% Mn. Weld metalis highly resistant to impact , wearing. and hot cracking. It is especially suitable for military usage , such as mine sweepers. Preheating or postweld heat treatment is not required.

Applications :

It can be use for 18% Cr-8%Ni stainless steel, 14% Mn steel, the steels with poor weldability and buffer layer welding.

Note On Usage :

1. Rebake the electrodes at 200°C for 1 hour and keep it at 100°C prior to use.

2. Use stainless steel wire brush for cleaning of slags.

3. Follow the recommended welding parameters to  achieve good sound welds.

Typical Chemical Composition Of Weld Metal (wt%) :

Weld Metal Analysis :

Carbon (C)               0.082

Chronium (Cr)          19.70

Nickel (Ni)                7.80

Manganese (mn)        6.20

Silicon (Si)                 0.45

Phosphorus (P)          0.010

Sulphur (S)                0.011

Typical Mechanical Properties Of Weld Metal :

TS N/mm2                 615

EL %                          42

Approvals And Conformances :

-

Sizes and Recommended Current Range (Ac or DC <+> )

Diameter	Length	Amp
mm	mm	F	V&OH
2.6	300	50-85	45-80
3.2	350	80-120	70-110
4.0	350	100-150	90-135
5.0	350	140-180