Description :

It is a hardenable 13% Cr steel wire with higher strength and hardness and better wear resistance than ER410 wire. This filler metal is similar to ER410, except for the higher carbon content. It requires preheat and interpass temperature of not less than 204C, followed by slow cooling. 

Applications :

It is often used for surfacing applications that call for superior resistance to abrasion.

Note On Usage:

1. For GTAW process, use DC-EN, Argo Shield and Tunsten Electrode.

2. For GMAW process, Spray Transfer or Short Circuit Transfer mode can be used.

3. 98% Argon -2% O2 shielding gas is recommended in GMAW process.

Typical Chemical Composition Of Weld Metal (wt%) :

Weld Metal Analysis :

Carbon (C)               0.031

Chronium (Cr)          13.10

Manganese (Mn)      0.40

Silicon (Si)                0.38  

Nickel (Ni)               0.32

Typical Mechanical Properties Of Weld Metal:

TS N/mm2              520

EL%                       25

Approval and Conformances :

-

Size Available

MIG Solid Wires (mm)	0.6, 0.8, 0.9, 1.0, 1.2, 1.6
TIG Rods (mm)	0.8, 0.9, 1.0, 1.2, 1.6, 2.0, 2.4, 3.2, 4.0